Noopsyche K7 Pro 3 WiFi Reef Aquarium LED Light Full Spectrum

The K7 Pro III WiFi is the latest light release from Noopsyche after the popular K7 Pro 2 and V3. This new led light have a WiFi function to help you control the light using an APP in your mobile phone.

Specifications

Power : 140W

Voltage : 100-240V  50/60Hz 2.5A 

Fixture dimensions : 21.2 cm x 12.7 cm x 3.1 cm (9.34" x 4.72" x 1.18" inches)

Weight : 0.76 kg

LEDs

Osram cool white : 6 pcs

Osram blue : 10 pcs

Osram royal blue : 4 pcs

SemiLED 430nm : 8 pcs

SemiLED 415nm : 4 pcs

SemiLED 405nm : 2 pcs

Osram red : 2 pcs

Osram green : 2 pcs

Osram warm white : 2 pcs

Recommendations

How many lights do I need for my reef aquarium?

Your aquarium dimensions :

60 cm long (1 light) 

70 cm to 100 cm long  (2 lights)

110 cm to 150 cm long (3 lights)

160 to 200 cm long (4 lights)

User Manual of the Noopsyche K7 Pro III Aquarium LED Light

Notice

When powered on, the light will automatically run the previous saved settings, including the timeline, program, and brightness.

Requires the Noo—Psyche app to be installed on your phone for access.

QR code for Noo—Psyche app is provided.

IOS users can download the app from the App Store, while Android users can download it from https://noo—psyche.com/ or scan the QR code.

Factory Reset

Change LED indicator color by tapping the L button:

Red: Tap L to turn blue

Blue: Tap L to turn red

Red: Press and hold L to turn green

Green: Press and hold L to turn red

To reset the light, hold the R button when the LED indicator is red.

Configuring Master/Slave Lighting

To set a light as a slave, hold the L button when the LED indicator is on. The green indicator light will flash. Repeat for all slaves.

To set a light as a master, hold the L button when the LED indicator is blue. The indicator light will flash.

To sync the brightness of all slaves, turn the indicator of the master light to red by tapping the L button, then hold the L button until the indicator flashes red, and release it to send data to the slaves.

Connection Modes

There are two connection modes: LAN and AP mode.

To switch between modes, press and hold the R button:

Flashing blue twice: LAN mode

Flashing red twice: AP mode

LAN Connection

Noopsyche devices only support 2.4GHz routing band.

To connect the light in LAN mode, press and hold the R button when the indicator is blue, and release it when it stops flashing.

Connect the light to a router and enter the password.

AP Connection

Confirm the light is in AP mode.

Open WiFi on your phone and open the Noo—Psyche app.

Connect to the K7_Pro+number in the WLAN list with password 12345678.

Select AP connection and save.

Setting Up Modes

After connecting the app and light, access the modes for your reef tank type (SPS, LPS, SPS/LPS preset).

Two operating modes: manual and auto mode.

Manual mode: select LPS, adjust brightness using the bar, select manual and save.

Auto mode: select LPS, select auto, and save. A green dot will appear to indicate LPS mode is running.

To modify parameters: select auto, select Time Point Setting, set time points and brightness, click confirm, save, and demo mode.

To export/import settings, click export to generate a QR code, share, or scan to import.

Warnings

Suddenly increasing brightness can harm corals.

It is recommended to set initial total brightness to 50% when switching from weak lights.

Warranty

Noopsyche LED lighting products have 12 months warranty from the date of purchase.

Warranty covers free repair or replacement of parts for quality problems.

Warranty does not cover damage due to modification, accident, misuse, or unauthorized repair.